|
 |
|
To find an item on this page hit CTRL+F
|
|
7284 |
Nelmor |
Closed Rotor |
GRANULATOR |
|
Model: |
2036 |
Size: |
20" x 36" |
L/D Ratio: |
|
Year: |
80's |
|
Nelmor grinder, Feed Opening 20" x 36", Colsed Rotor, 3 Fly & 2 Bed Knives, Belt Driven, 100 HP Motor 230/460V, Complete with Electricals, Set up for Gayloard Discharge on Base with Work Platform.
 |
|
|
|
|
|
|
|
|
|
|
7282 |
Cumberland |
Open Rotor |
GRANULATOR |
|
Model: |
50B |
Size: |
20" x 50" |
L/D Ratio: |
|
Year: |
80's |
|
Cumberland 50B
5 knife Fly, 2 Bed
Open Rotor - High Shear
18" Cutting Circle- 3,000/5,000 Lbs,/Hr. Thruput
150 HP Motor
Feed Hopper avaliable (Not Show)
 |
|
|
|
|
|
|
|
|
|
|
|
Leibstritz |
|
PLASTIC RECOVERY SYSTEM |
|
Model: |
Conical |
Size: |
200MM/150MM |
L/D Ratio: |
30 |
Year: |
1982 |
|
Reclaim Line with Leibstritz Conical Extruder, Vented, 200MM-150MM L/D 30:1, Mfg 1982, New barrels and screws in 2003, 260KW, about 350HP PHT water ring pelletizer, 2003, Munchie pelletizer, 2005, metal detectors, Vicoplan Shredder 200/160 Single shaft 90 kW main motor Opening W 2000 mm Opening L 1800 mm, single shaft, 90 KW, about 125HP, complete new electrical panels, complete new operators panel
![]() |
|
|
|
|
|
|
|
|
|
|
7275 |
Davis Standard |
Continuous |
PLASTIC LUMBER LINE |
|
Model: |
PM-IV |
Size: |
3.5 |
L/D Ratio: |
24 |
Year: |
1997 |
|
3.5" Davis Standard / NRM extruder, model PM-IV-24-1, 24:1 L/D, electrically heated, water cooled, 75 HP DC motor, 15.12:1 gearbox ratio, 4 barrel zones, 3 die zones Eurotherm digital temperature controllers, serial# 19308, new 1997, One (1) Premier Pneumatics hopper feeder, type Pro Rate, with (4) hoppers, One (1) Conair self-contained vacuum loader, One (1) Conair Metaplast vacuum sizer/cooling tank, model MVS3-14-SP-R-L, 28" x 13" x 14' long, stainless steel construction, entry vacuum chamber, with vacuum pump, recirculation pump, serial# 85477, One (1) 18" x 48" RDN puller, model 148-18, rubber cleated belts, pneumatic pressure adjustment, 3 HP motor, serial# 33868, One (1) 12" RDN Auto Saw cross traveling cutt-off saw, model C-430-A, pneumatic clampimg and traveling mechanism, programable length meter, serial# 33867, One (1) gravity run-out roller conveyor.
 |
|
|
|
|
|
|
|
|
|
|
7239 |
Johnson Lesona |
Pelletizing |
EXTRUSION LINE |
|
Model: |
|
Size: |
3.5" |
L/D Ratio: |
30 |
Year: |
|
|
3.5" Johnson Lesona Extruder, 30:1 L/D, 75 HP DC Drive, Strand Die, Water Table, 8" Cumberland Pelletizer. $10,500.
![]() |
|
|
|
|
|
|
|
|
|
|
7160 |
Egan/Prodex |
Co-extrusion |
SHEET LINE |
|
Model: |
Poweflight |
Size: |
3.5"/22" Sheet |
L/D Ratio: |
30 |
Year: |
vari |
|
Equipment used for the manufacture of Polystyrene Sheet Rolls. The rolls were then used in the thermoforming of disposable plastic plates. Equipment List as follows:
One (1) Egan Extruder, 3.5" Powerflight---Three (3) Chrome Roll Stack Cooling System---Winding System---Set up to produce two (2) 22" rolls at once---Screen Changer
One (1) Prodex Extruder(1975), 2.5" Torquemaster TMs, 30:1 L/D; Non-vented---Downstream for sheet production---Winding System
One (1) Brown Thermoformer Model 821 HD (1976)---Trim Press Model TP10--
Two (2) Reinhessische Masch-Bau Gesselschaft Thermoformers (1966), Capacity Unwind 24" and Tension Compensator, Equipped with Preheat Section, Compression Section and Trim Section; ***One was totally rebuilt and never used***
One (1) Pioneer Refrigerant/Air Dryer (1990's)
Air Compressors, Ingersoll Rand Model SSR-EP100 (1990's)
Sullair Compressor, Model 25B-150L, 150 HP (1990's)
Includes Plate and Dish Molds
![]() |
|
|
|
|
|
|
|
|
|
|
7238 |
NRM |
Pelletizing |
EXTRUSION LINE |
|
Model: |
|
Size: |
4.5" |
L/D Ratio: |
24 |
Year: |
|
|
4.5" NRM Extruder, 24:1 L/D, Vented, 150 HP DC Drive, Screen Changer, Die, Water Bath and 8" Cumberland Pelletizer.
$12,000
![]() |
|
|
|
|
|
|
|
|
|
|
7260 |
Johnson |
Standard Single Screw |
EXTRUDER |
|
Model: |
|
Size: |
4.5" |
L/D Ratio: |
30 |
Year: |
70's |
|
Two (2) Johnson extruders 4 SALE
These are 30/1 L/D ratio
No motors or controls
Sold in as is condition / subject to availability.
 |
|
|
|
|
|
|
|
|
|
|
7237 |
Sterling |
Pelletizing |
EXTRUSION LINE |
|
Model: |
|
Size: |
4.5" |
L/D Ratio: |
32 |
Year: |
|
|
4.5" Sterling Extruder, 32:1 L/D, Vented, 200 HP DC Drive, Screen Changer, Die Water Bath and 6" Cumberland Pelletizer.
$39,000
![]() |
|
|
|
|
|
|
|
|
|
|
7102 |
Leistritz |
Hot Face |
PELLETIZING LINE |
|
Model: |
Z |
Size: |
40MM Twin Screw |
L/D Ratio: |
40 |
Year: |
2000 |
|
Twin Screw Pelletizing Line with Hot Feed Extruder--
Extruder #1: Leistritz Twin Screw, 40MM, 40:1 L/D, Zones 5-10, Ultra High Hardness D4 Barrel, 70 HP---
Extrudere #2: Merritt Hot Feed, 2.5", 12:1 L/D, Zones 3, Conair 304 Pelletizer, Side Feeder TSE 40---Controls: A-B PLC Panel View (*Plus Computerized Data Acquisition System)-- Inclused Strand Die, 10' Water Tank, Vacuum Pump, (3) Loss in weight Feeders w/ Computer Touch Screen integrated to TSE Controls, Vibratory Spiral Pellet Cooling Elevator (10' high), Vibratory Conveying Tray - 3' long, Upstrem Suto Feed Equipment Includes: (3) Auto Pellet Loading Valves---Machine has less than 100 hours,
Under Power-Replacement cost is over $700,000.
 |
|
|
|
|
|
|
|
|
|
|
7196 |
N/A |
Single Shaft |
SHREDDER |
|
Model: |
|
Size: |
45" x 42" |
L/D Ratio: |
|
Year: |
|
|
Single Shaft Shredder, Opening 45" x 42"---150 HpSiemans/Allis Motor, Type 444T, Model RG132---Shaft Diameter is 4" on the outside and goes to 5" where it goes throught the bearing blocks.---
Unit was in operation at time of decommissioning--No nameplate on the unit--Weighs approx. 3 Tons--Ships in 3 sections
 |
|
|
|
|
|
|
|
|
|
|
7278 |
SSI |
Dual Shaft |
SHREDDER |
|
Model: |
3000 H |
Size: |
50" x 40" |
L/D Ratio: |
|
Year: |
|
|
SSi 3000 H
200 hp Hydrolic Shredder ( 2 - 100 HP Motors )
Approx: 40" X 50" opening at knives ( Has open top intake chamber not shown )
Loaded on buyers transport.
 |
|
|
|
|
|
|
|
|
|
|
7188 |
Saturn |
Dual Shaft |
SHREDDER |
|
Model: |
3252 |
Size: |
52 x 32 |
L/D Ratio: |
|
Year: |
1978 |
|
Completely Rebuilt Twin Shaft Shredder--Two (2) 75 HP Motors with Hydraulic Pump providing total 150 HP Pumps New in 2008--
Electrical Control Panel w/ Auto Reverse, Feed Hopper & Stand--
Rebuilt in Dec. 2008: New Cutting Knives and Spacers, Shafts, Bearings, Couplings and Reconditioned Motors. Over $60,000 spent alone in all new parts.
 |
|
|
|
|
|
|
|
|
|
|
7236 |
Prodex |
Pelletizing |
EXTRUSION LINE |
|
Model: |
|
Size: |
6" |
L/D Ratio: |
32 |
Year: |
|
|
6" Prodex Extruder, 32:1, L/D, Vented, Screen Changer, Strand Die, Water Bath and 14" Cumberland Pelletizer. $30,500.
![]() |
|
|
|
|
|
|
|
|
|
|
7062 |
Van Dorn |
Horizontal |
INJECTION MOLDING MACHINE |
|
Model: |
700H-RS80 |
Size: |
700 Ton |
L/D Ratio: |
|
Year: |
1987 |
|
Tie Bars 36 x 36, Platens 53 x 53, Hydraulic Clamp, 80 oz. Shot, Core Pull, SCI Solid State Control
![]() |
|
|
|
|
|
|
|
|
|
|
7159 |
Various |
Wire Chop Line |
WIRE CHOP LINE |
|
Model: |
Various |
Size: |
n/a |
L/D Ratio: |
|
Year: |
|
|
Complete Wire Chop Line capable of 500-1000 lbs/hr. System is wired 480V,3 Phase, requires 200A service. Sold as a complete system-will no separate components. ***Buyer is responsible for disconnecting, rigging and shipping***
One (1) Shred Tech 30 x 36" Shredder, (2) 20 HP Motors---One (1) Cumberland 40 HP Model 20 Granulator---One Triple S Model BX250 Air Table, VFD Controlled---One (1) Grizzly 5 HP Dust Collector---One 16' Incline Conveyor---One (1) 8' Incline Conveyor w/ Eriez Mag Separator---One (1) Surge Bin---One (1) 16' Incline Screw Conveyor, VFD Controlled---Control Panel---Cable Tray, Disconnects, Interconnect Cables
 |
|
|
|
|
|
|
|
|
|
|
7208 |
Varoius |
Wash Line Components |
MISCELLANEOUS |
|
Model: |
|
Size: |
n/a |
L/D Ratio: |
|
Year: |
|
|
Components for a Wash - Purchase separately or as a package---One (1) Sink Float Tank, SS, w/ inside rotors a escape valves---One(1) Vincent Horizontal De-Watering Press w/conveying screw---One (1) Gala Spin rinser, HP, SS, Hollow shaft with Spray Nozzles, Rotary Union in the bottom, no door or screen---One (1) Gala Spin Dryer, Model 12.3BF, ECLN Design, SS, 7 1/2 HP, no door or screen---Call for price
![]() |
|
|
|
|
|
|
|
|
|
Return To Top Of This Form
Home
American Cierra Equipment, Inc.
144 Genesee Street
Suite 102-207
Auburn, New York 13021
Phone: 315.252.5668
sierraric@aol.com
Copyright 2004 ©
American Cierra Equipment, Inc.
All Rights Reserved
This Site Maximized For
Internet Explorer
©
Version 5.0
and Higher
|
|
American Cierra Equipment Inc., is your
source for used plastic equipment, used process equipment, plastic equipment,
recycling equipment, used recycling equipment, tire recycling equipment,
plastics recycling equipment, pallet recycling equipment, plastic wood
equipment, plastic lumber equipment, plastic product wood machinery, plastic
wood deck machinery, composite plastic wood, and recycled plastic lumber. Our
manufacturers include Cumberland, Davis Standard, Wellex, MPM, MRM, Hartig,
Gala, Gloucester, Egan, SSI, and HPM. Our product lines include plastic lumber
machines, recycle machines, complete processing lines, rebuilt machinery, used
machinery of all types, shredders, grinders, extruders, granulators, injection
molders, blow molders, profile extrusion machinery, material handling machinery,
film and paper converting machinery, film and sheet equipment. Leasing is
available. Appraisal services available.
|
|
